Call +1 613 729 8059

Welcome to our online store

SCATT WS1 Wireless

Be the first to review this product

Computer-controlled aiming point graphics and measurements

Availability: Shipping time varies, comfirmed upon order. Pre Order

$1,999.99
MEC

Product Description

Details

SCATT WS1 — is used for fixed target training at distances from 5 to 10 meters and imitates shooting up to 1000 meters. using pneumatic, small and large caliber sharpshooter weapons, archery bows, crossbows and other types of weapons.

Set of the simulator include:

SCATT electronic target WT-01Electronic target – (Model: WT-01) installed instead of the usual target (hangs on the wall, Bullet catcher or mounted on a photo tripod), connected to the control unit, without requiring a separate power supply. In the special grooves on the body of an electronic target put paper target appropriate to choose an exercise and distance. Electronic targets can be used at ranges from 5 to 10 meters, which allows to train in different locations, using one electronic target.
To target the top and bottom are the LEDs red and green, designed for training with limited time on the shot (e.g. sport pistol). The target has a built-in wireless connectivity, and can be used with wireless optical sensors SCATT. Target is made of durable ABSplastic and can withstand bullets from hitting air rifle.

Wireless optical sensor WS-03Wireless optical sensor – (Model: WS-03) fixed on the firearm, this highly accurately measures the weapon’s alignment during aiming and actuation of the trigger mechanism. Metal fasteners of different dimensions, for use with various diameter barrels, allow the sensor to be fixed to the barrel or gas cylinder. Use collet framing to fix the sensor to the barrels of different pistol calibers. Optical sensor automatically measures the distance to the electronic target. The program allows you to automatically calibrate the sensor relative to the sighting of weapons, so there is no need for an amendment to the sights of weapons. Sensor automatically compensates for the “blockage” of weapons! For the convenience of an optical sensor has a convenient system mounting on the weapon, which allows you to vary the sensor position with respect to weapons. Optical has two-way infrared connection to electronic target.

To USB connector of optical sensor may be connected SCATT WTS trigger sensor.

Sensor has a built-in battery and can be recharged from the USB port of your computer. To fully charge requires 1.5 hours. Battery life approximately 30 hours of sight (about 10,000 shots with an average time of sighting 10s.). In case of non-use, the sensor automatically switches to low power mode. Weight 30g.

SCATT electronic control boxElectronic target control – (Model: WTC-01) connect to USB port of a computer by cable.

All-purpose mounting setMounting kit for the optical sensor — includes allen key, mounting prism and metal strip with screw that are used for fixing the sensor on the barrel of different diameters and cross sections. At the request of the customer set can be beefed up with extra fastenings see Fasteners (to secure optical sensor on the gun).

14m target cableTarget interface cable — used to connect the electronic target to the control unit, has a length of 14m.

USB A-B cableTarget control unit’s interface cable — used to connect the control unit to USB port of your computer, has a length of 1,5m.

USB A-mini B cableOptical sensor charging cable — used to charge the optical sensor WS-02 from USB port of computer, has a length of 0,5m.

Software — SCATT Professional software has all the necessary features for efficient training and overall analysis of shooting results. Results are displayed in both digital and graphic forms and can be saved onto disk for further analysis (aim trajectory, shots and graphics, etc).

Reviews

Write Your Own Review

You're reviewing: SCATT WS1 Wireless