Call +1 613 729 8059

Welcome to our online store

NewSale

SPUHR - QDP-4602 Scope Mount Ø34 H38mm/1.5" 6MIL Quick detachable mount

Be the first to review this product

Article no.: SP-4601




Rings: 34 mm

Tilt: 6 MIL/20.6 MOA

Height: 38 mm/1.5””

Length: 121 mm/4.76” (mount body only)

Weight: 267 g/9.4 oz

Interfaces: 7 sets

EAN: 7340150705077


Quick detachable mount featuring side clampand dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. The mounts are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized. 


Quick detachable mount featuring side clampand dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body.

Note: Dual adjustable QDP levers. Will not fit US Optics TPAL/EREK and Nightforce BEAST. Suitable for extended Picatinny rails. Quick-release model



.



 

Availability: Shipping time varies, comfirmed upon order. Pre Order

Regular Price: $799.00

Special Price $764.10

Spuhr

Product Description

Details

ISMS

Ideal Scope Mount System

Extremely sturdy scope mount, with possibility to attach multiple optical accessories directly to the mount. Built-in level. 45-degree split of the rings provides unobstructed view of the knobs.

Durability

Prevents damage on scope due to flexing during heavy recoil or rough handling. The snipers rifle and the spotter’s carbine can have the same mount, enabling the use of the same or shared equipment and accessories. 

Scope rotation

Innovative solution for indexing the rotation of the scope, using the included tool/gauge to index the scope correctly to the mount and gun. This is very important since if the scope is not properly indexed there will be an unintended lateral shift of the point of impact whenever the elevation is adjusted.

Mounting placements

Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don’t want your barrel to touch the forend you don ́t want the sights to be mounted on the forend. Our mounting system have up to seven interfaces for accessories, and the laser can easily be attached to the scope mount,  providing the advantage of undisturbed laser and having the weight close to the centre of the gun instead of forward.

Tilt

Mounts can be delivered in various tilts. The tilt is clearly engraved on the mount, in both MIL and MOA.

Accessible and readable dials

The rings are cut at 45 degrees instead of horizontaly, providing several advantages; the screws holding the parts together are not obscuring the knobs, thus the shooter can quickly determine the settings of the knobs.It also gives the shooter a horizontal reference line helping the shooter subconsciously to avoid canting the rifle to the side.

The rings have index marks on the top and right side, making low knobs more easily readable.

Accessories

Provides use of various accessories such as angle cosine indicator (ACI), back up sights, lasers, illuminators, night vision mounts etc. with a minimized ”footprint”. With traditional mounts this can only be achieved if there is sufficient space on the middle tube for additional rings, which there rarely is. The ”Ideal Scope Mount System”™ have interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces. A selection of interfaces for popular accessories are available, and others can be made to customer specifications.

Level

The sight mount have a level included in the rear of the mount.

Note: Will fit most 34 mm scope tubes except for US Optics TPAL/EREK and Nightforce BEAST. Suitable for bolt action rifles with 1-piece Picatinny rails.

Article no.: QDP-4602

Quick detachable mount featuring side clampand dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Height: 38 mm/1.5” Length: 121 mm/4.76” (mount body only) Weight: 267 g/9.4 oz 10-degree wedge included

FILES AND MEDIA

QDP Manual

Reviews

Write Your Own Review

You're reviewing: SPUHR - QDP-4602 Scope Mount Ø34 H38mm/1.5" 6MIL Quick detachable mount