Search results for 'pistol case standard'
-
MDT- PISTOL GRIP CARBON FIBER
The MDT Pistol Grip Carbon Fiber has been designed to provide superior ergonomics with insight from expert shooters’ experience and preferences. Compatible with MDT Chassis Systems as well as a standard AR-15 interface.
Learn More$169.95Shipping times may vary and will be confirmed upon order
Out of stock
-
MDT-PISTOL GRIP WOOD
The MDT pistol grip has been designed to provide superior ergonomics with insight from expert shooters’ experience and preferences. Compatible with MDT Chassis Systems as well as a standard AR-15 interface.
-
MDT-Pistol Grip Elite
SKU:103419-BLK
The MDT pistol grip has been designed to provide superior ergonomics with insight from expert shooters’ experience and preferences. Compatible with MDT Chassis Systems as well as a standard AR-15 interface.
Learn More$34.95Shipping times may vary and will be confirmed upon order
Out of stock
-
MDT- M-LOK EXTERIOR FOREND WEIGHTS (PAIR)
Perfect for adding weight and balance to your rifle.
Adding weight to a rifle can cut down on recoil, allow one to self-spot their shots and balance their rifle. These weights mount on to the exterior of any chassis or stock that is M-LOK compatible. They mount using standard hardware and M-LOK T-nuts, meaning that you can install and remove them as necessary on your system.
A pair of weights and hardware will add 0.70 lb to your chassis/stock.
Learn More$69.95Shipping times may vary and will be confirmed upon order
Out of stock
-
MDT- HNT26 CHASSIS SYSTEM 700 SA RH ARCA Black and Carbon Fiber Folding
SKU:106129-BCF (Reminton700 SA RH black and carbon)
WARM TOUCH AND LIGHTWEIGHT CARBON FIBER
Learn More
LOW PROFILE MAG LACH INTEGRATES SEAMLESSLY INTO THE TRIGGER GUARD
M-LOK ENCLOSED FOREND (INTEGRATED ARCA )
VERTICALLY ADJUSTABLE FOAM CHEEK RISER
AICS MAGAZINE COMPATIBLE
MDT PISTOL GRIP - CARBON FIBER INCLUDED
FOAM FILLED CARBON FIBER BUTTSTOCK (FIXED OR FOLDING OPTIONS AVAILABLE)
FRONT AND REAR SLING SWIVEL MOUNTS
CERAKOTE COBALT GREEN OPTION AVAILABLE -
MDT- Vertical Grip Premier
SKU:105173-BLK
Perfect for all long-range shooting disciplines, the MDT Vertical Grip Premier allows fore and aft adjustment to accommodate any hand size.
Learn More -
MDT- ACC Chassis System CZ 457 RH BLK
SKU:104819-BLK (CZ 457 BLACK)The ACC (Adjustable Core Competition) Chassis is designed around an integrated, modular weight system which allows you to customize the balance and mass of your rifle to maximize performance and minimize recoil.
The ACC comes with a Skeleton Rifle Stock with a steel butt pad plate, for added weight, and a dedicated space to add even more weight to the stock if required.
The ACC Chassis features a full Arca rail the entire length of the forend and M-LOK mounting points for accessories and additional forend weights - both internal and external - allowing you to add up to an additional 9 pounds of steel to your rifle.
Learn More$1,559.95Shipping times may vary and will be confirmed upon order
Out of stock
-
MDT- ACC Chassis System Remington 700 SA RH BLK
SKU:103734-BLK (Reminton700 SA RH black)
The ACC (Adjustable Core Competition) Chassis is designed around an integrated, modular weight system which allows you to customize the balance and mass of your rifle to maximize performance and minimize recoil.
The ACC comes with a Skeleton Rifle Stock with a steel butt pad plate, for added weight, and a dedicated space to add even more weight to the stock if required.
The ACC Chassis features a full Arca rail the entire length of the forend and M-LOK mounting points for accessories and additional forend weights - both internal and external - allowing you to add up to an additional 9 pounds of steel to your rifle.
Learn More -
MDT- CKYE-POD Gen2 Single Pull Standard
SKU:106292-BLK (BTC-Picatinny and ARCA Compatible)
If you're a hunter or a match shooter looking for a game-changing piece of gear, look no further than the MDT Bipod. Quality craftsmanship and fast, simple, one-handed adjustments make this bipod the ultimate platform for stability and versatility.
Learn More -
MDT- M-LOK ARCA RAIL 10.25
SKU:103572-BLK (10.25 inches)
Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail.
Arca Swiss adapters have become the standard for attaching rifles to tripods, bipods and support gear. Need to attach your MDT Chassis rifle to an ARCA interface? Use our M-LOK ARCA Rail.
The MDT M-LOK ARCA Rail is Mil-spec Type II hard-black anodized. Available as a standard, flat profile that can adapt to most M-LOK compatible surfaces or as an angled profile that is designed to match the underside profile of the MDT LSS-XL Gen2.
Learn More -
MDT - M-LOK ADJUSTABLE THUMB REST
The MDT M-LOK Adjustable Thumb Rest is an essential tool for rifle aficionados. Emphasizing control, adaptability, and precision. It's the perfect fit for both seasoned shooters and passionate hobbyists. Useable in any standard M-LOK slot.
Learn More -
MDT- .308/6.5 Creedmoor MDT Metal AICS Magazine - 5 RND
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
without the front binder plate. See details below for benefits and limitations
Learn More -
MDT- M-LOK ARCA RAIL 8.6"
SKU:103570-BLK (8.6 inches)
Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail.
Arca Swiss adapters have become the standard for attaching rifles to tripods, bipods and support gear. Need to attach your MDT Chassis rifle to an ARCA interface? Use our M-LOK ARCA Rail.
The MDT M-LOK ARCA Rail is Mil-spec Type II hard-black anodized. Available as a standard, flat profile that can adapt to most M-LOK compatible surfaces or as an angled profile that is designed to match the underside profile of the MDT LSS-XL Gen2.
Learn More -
MDT- 6BR MDT Metal AICS Magazine - 10 RND
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
Learn More -
MDT- .308/6.5 Creedmoor MDT Metal AICS Magazine - 10 RND
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
without the front binder plate. See details below for benefits and limitations
Learn More$79.95Shipping times may vary and will be confirmed upon order
Out of stock
-
MDT- 6BR MDT Metal AICS Magazine - 12 RND
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
Learn More -
MDT- .223 MDT Metal AICS Magazine
These magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.
Learn More -
$89.95
Shipping times may vary and will be confirmed upon order
Out of stock
-
$89.95
Shipping times may vary and will be confirmed upon order
Out of stock