Rifle parts and Accessories

SKU:103563-BLK   (Anschutz 1712)

MDT's Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle.

Perfect for adding weight and balance to your rifle.

Adding weight to a rifle can cut down on recoil, allow one to self-spot their shots and balance their rifle. These weights mount on to the exterior of any chassis or stock that is M-LOK compatible. They mount using standard hardware and M-LOK T-nuts, meaning that you can install and remove them as necessary on your system.

A pair of weights and hardware will add 0.70 lb to your chassis/stock.

SKU:103548-BLK (34MM medium 1.00in)

Our Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum.

Replace your current MDT SRS (Skeleton RIfle Stock) cheek piece with the MDT Elite Cheek Piece featuring a more narrow profile cheek rest for better positioning when shooting weak side. This Elite Cheek Piece also comes with a 1/16" neoprene foam pad on the surface for added comfort.

SKU:105560-GRN (picatinny)

The MDT GRND-Pod (pronounced "Ground-Pod") was developed for the shooter wanting a stable and secure platform to shoot off of without breaking the bank. The MDT GRND-Pod is designed to adapt to the picatinny and RRS Dovetail/ARCA mounting interfaces and offers shooters a one hand adjustable height range from 4.5" - 9", with 4-locking positions in the 0°, 50°, 90° and 180° positions. The MDT GRND-Pod legs are also Atlas/Ckye-Pod foot compatible and can be fully extended just by pulling down on the legs in any position!

SKU:103564-BLK   (Anschutz 1416)

MDT's Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle.

SKU: 106587-BLK (CZ 457) 50 MOA

MDT's Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle.

Add weight to the front section (forend) of your MDT XRS Chassis System to achieve optimal balance and help reduce felt recoil.

SKU:103631-BLK

Increase the capabilities of your MDT buttstock.

The Rear Bag Rider offers an end user an additional 5" to interface with a rear bag, or compliment multiple shooting positions. A flat, horizontal surface aids in linear recoil and the rounded profile reduces snagging on bags and gear. Mil-Spec Type III hard-black anodized aluminum. Attaches to M-LOK compatible and legacy buttstocks.

SKU:105561-GRN (RRS Dovetail/ARCA)

The MDT GRND-Pod (pronounced "Ground-Pod") was developed for the shooter wanting a stable and secure platform to shoot off of without breaking the bank. The MDT GRND-Pod is designed to adapt to the picatinny and RRS Dovetail/ARCA mounting interfaces and offers shooters a one hand adjustable height range from 4.5" - 9", with 4-locking positions in the 0°, 50°, 90° and 180° positions. The MDT GRND-Pod legs are also Atlas/Ckye-Pod foot compatible and can be fully extended just by pulling down on the legs in any position!

SKU:106557-BLK (Reminton700 SA RH black)

The MDT ACC Elite ensures that top-tier shooters reach the podium. This is a perfect fusion of design, engineering, and industry expertise. The end result, a competition chassis that outperforms anything to date.

Unmatched balance, recoil control, weight management, and utility, allow elite shooters to shave seconds off stage times and get more rounds on target.

SKU: 106631-BLK (Savage SA) 40 MOA

MDT's Scope Base Picatinny Rails are a precise and reliable solution when it comes to mounting a scope on your bolt action rifle.

 MDT- LRA Adjustable Level Mount (30MM) 

SKU:107197-BLK

The ACC (Adjustable Core Competition) Chassis is designed around an integrated, modular weight system which allows you to customize the balance and mass of your rifle to maximize performance and minimize recoil.

The ACC comes with a Skeleton Rifle Stock with a steel butt pad plate, for added weight, and a dedicated space to add even more weight to the stock if required.

The ACC Chassis features a full Arca rail the entire length of the forend and M-LOK mounting points for accessories and additional forend weights - both internal and external - allowing you to add up to an additional 9 pounds of steel to your rifle.

SKU:106129-BCF (Reminton700 SA RH black and carbon)

WARM TOUCH AND LIGHTWEIGHT CARBON FIBER
LOW PROFILE MAG LACH INTEGRATES SEAMLESSLY INTO THE TRIGGER GUARD
M-LOK ENCLOSED FOREND (INTEGRATED ARCA )
VERTICALLY ADJUSTABLE FOAM CHEEK RISER
AICS MAGAZINE COMPATIBLE
MDT PISTOL GRIP - CARBON FIBER INCLUDED
FOAM FILLED CARBON FIBER BUTTSTOCK (FIXED OR FOLDING OPTIONS AVAILABLE)
FRONT AND REAR SLING SWIVEL MOUNTS
CERAKOTE COBALT GREEN OPTION AVAILABLE

The MDT Pistol Grip Carbon Fiber has been designed to provide superior ergonomics with insight from expert shooters’ experience and preferences. Compatible with MDT Chassis Systems as well as a standard AR-15 interface.

The MDT XRS Tikka T1X BLK (SKU:105524-BLK) Is a hybrid system bringing the benefits of a chassis to shooters who prefer a more traditional feel.

The MDT XRS is a hybrid system bringing the benefits of a chassis to shooters who prefer a more traditional feel.

Currently available for Remington 700 SA RH BLK (SKU: 104691-BLK)

The MDT XRS is a hybrid system bringing the benefits of a chassis to shooters who prefer a more traditional feel.

Currently available for Remington 700 SA RH FDE (SKU: 104691-FDE)